A & B Sandblasting, Inc.

This pool deck area had a white hazy look due to trappted moisture under the wrong sealer. After sandblasting and re-sealing the pavers look like new.

Pool deck before sandblasting

After sandblasting and re-sealing

Paver driveway with entrance area before sandblasting

After sandblasting and re-sealing

Before sandblasting

After sandblasting and re-sealed

These two pictures show a section of a multiple stained stamped concrete driveway before and after the sandblasting procedure. We always adjust the sand grade and pressure to get the best possible results.

This stamped concrete driveway had three layers of concrete stain or paint on and it was peeling off everywhere. To ensure that the next staining is successfull, the driveway needed to be stripped to the bare concrete.

 After Prepared for new paint job.

Iron gates with peeling paint sandblasted for electrostatic painting.

No damage to the walls or windows after the sandblasting.

Doors and hatches protected

Landscaping protected

Several layers of paint removed

After
(Ready for resurfacing)

After
(We wet blasted a wall to remove waterproofing and stucco)

100% improofment after sandblasting and re sealing

This project was done due to sealer build up, white and milky spots, partial paver replacements and colour differences in several areas.

Wood refurbished